Synthetic Fluorescent Aerosol

TOPSYNFLR


A high quality '2 hour dry' Synthetic Alkyd Fluorescent Enamel aerosol. This product is to be used as part of a 3 coat system.

hmg tin photo

Data Sheets

Technical Properties

Coverage

10 square metres per litre @ 50 microns dft

Flashpoint

-42 °C

Temperature Resistance

170 °C

Storage

Store between 5°C - 25°C. When not in use, cans must be kept sealed

Shelf Life

12 months from delivery date in original sealed containers

Additional Technical Information

The light-fastness of fluorescent pigments (all grades) is between 2 - 3 on the Blue Wool Scale (of 8). This level of colour fastness is increased to 3 - 4 by over-lacquering with a UVRA containing clear varnish or lacquer. Please ask our Technical Service Department for specific recommendations.

In all environments, Fluorescent paints will fade 5 - 10 times faster than conventional industrial, decorative or automotive coatings.

SIGNAL GREEN SUITABLE FOR SMALL AREAS ONLY.

Maximum VOC Content

0.45 Kg/l

Regulations

Out of Scope

Colour Range

Blaze, Fire Orange, Rocket Red, Saturn Yellow, Signal Green, Aurora Pink and Horizon Blue.

Cleaning

Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.

Surface Preparation

Synthetic Fluorescent is a three coat system. 1) BDX White Primer 2) Synthetic Fluorescent 3) Overcoat with HMG Marine Varnish to attain gloss, improve durability and help protect against UV degradation Please refer to Knowledge Base for details on Surface Preparation.

Health & Safety

  • Refer to SDS and tin label prior to use.
  • Suitable respiratory equipment should be worn when spraying.

Additional Information

Synthetic Fluorescent is a three coat system.
1) BDX White Primer
2) Synthetic Fluorescent
3) Overcoat with HMG Marine Varnish to attain gloss, improve durability and help protect against UV degradation

Issued

22/09/2005 16:35:00

Getting in touch.

To place an order or to find out more about HMG Paints get in touch via the details below.