Technical Properties

Coverage

20 square metres per litre @ 20 microns dft

Flashpoint

4 °C

Temperature Resistance

Up to 80 °C

Storage

Store between 5°C - 25°C. When not in use, cans must be kept sealed

Shelf Life

12 months from delivery date in original sealed containers

Maximum VOC Content

0.70 Kg/l

Regulations

For use in Aerosol, Classis Car Refinish and Industrial Applications

Not to be used in connection with 2004/42/CE

Not to be Used under SI2005:27773

Colour Range

Available in a wide colour range including RAL & BS & Classic Car shades.

Fluorescent colours are available (See separate TDS)

Cleaning

Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of Preparatory Cleaners suitable for most cleaning and degreasing processes. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.Over Wood: Fill grain as appropriate using good quality wood filler. Flat thoroughly using 180 - 240 Garnet Paper. Tak rag surface. Apply HMG Spirit Stain if appropriate. HMG Sanding Sealer or HMG Pre-Cat Sanding Basecoat are used on woods subject to grain raising prior to application of Industrial cellulose lacquers. Pre-treatment: Under 'pigmented' Industrial Cellulose colours on wood and on steel substrates a variety of HMG Build Up systems can be used including: HMG E9 White/Grey Primer, and HMG 2 Pack or Stoving Primer Systems. NB: If M99 cellulose is to be used over aluminium and alloys an HMG etch primer or Washfiller must be used. For full advice on priming difficult substrates, please contact: HMG Technical Support.

Surface Preparation

Please refer to Knowledge Base for details on Surface Preparation.

Health & Safety

• Refer to SDS and tin label prior to use.

Issued

22/09/2005 16:35:00