C71 Speedline

TOPC71


A high quality '2 hour' drying time Synthetic Alkyd Enamel. It offers fast surface drying, good through drying even in thick films and outstanding film hardness and toughness. In addition, yellowing is minimal even after prolonged exposure to higher temperatures

Technical Properties

Coverage

8 square metres per litre @ 50 microns dft

Flashpoint

29 °C

Temperature Resistance

170 °C

Storage

Store between 5°C - 25°C. When not in use, cans must be kept sealed

Shelf Life

12 months from delivery date in original sealed containers

Maximum VOC Content

0.45 Kg/l

Regulations

Out of Scope

Colour Range

Available in a wide colour range including RAL & BS shades

Cleaning

Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.

Surface Preparation

Please refer to Knowledge Base for details on Surface Preparation.

Health & Safety

  • Refer to SDS and tin label prior to use.
  • Suitable respiratory equipment should be worn when spraying.
  • Contaminated Rags, Spray Booth Filters or other substrates should be segregated from other chemical waste, soaked with Water and disposed of in a non-combustible container with a tight fitting Lid.

Issued

22/09/2005 16:35:00

Getting in touch.

To place an order or to find out more about HMG Paints get in touch via the details below.