HB05 Primer

PRI05


An Alkyd based, high build primer offering outstanding adhesion, moisture resistance and corrosion protection due to incorporation of modified Zinc Phosphate. Designed for airless or conventional application for structural steelwork, chassis, steel fabrication etc. It is easy to apply without fear of runs or sags at high wet film thickness.

hmg tin photo

Data Sheets

Technical Properties

Coverage

5.5 square metres per litre @ 100 microns wft

Flashpoint

24 °C

Temperature Resistance

60 °C

Storage

Store between 5°C - 25°C. When not in use, cans must be kept sealed

Shelf Life

12 months from delivery date in original sealed containers

Maximum VOC Content

0.400 Kg/l

Regulations

Not Applicable

Colour Range

Black, Buff, Grey, Red Oxide and White. Other colours available on request.

Cleaning

Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of Preparatory Cleaners suitable for most cleaning and degreasing processes. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.

Surface Preparation

Please refer to Knowledge Base for details on Surface Preparation.

Health & Safety

  • Refer to SDS and tin label prior to use.
  • Contaminated Rags, Spray Booth Filters or other substrates should be segregated from other chemical waste, soaked with Water and disposed of in a non-combustible container with a tight fitting Lid.

Issued

22/09/2005 16:35:00

Getting in touch.

To place an order or to find out more about HMG Paints get in touch via the details below.