SAH300 Enamel Resin
TOPSAHBASCLE
SAH 300 Enamel Resin is used as part of the HMG Synthetic Mixing Scheme in combination with HMG Synthetic Double Base Tints and 7090 Lead Free Driers. Full mixing details are given on HMG ColourBase. Full Techical Information is available on the SAH 300 Enamel Technical Data Sheet.
Data Sheets
Technical Properties
Coverage
15 square metres per litre @ 25 microns dft
Flashpoint
37 °C
Storage
Store between 5°C - 25°C. When not in use, cans must be kept sealed
Shelf Life
12 months from delivery date in original sealed containers
Maximum VOC Content
0 Kg/l
Regulations
Not Applicable
Colour Range
Cleaning
Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.
Surface Preparation
Please refer to Knowledge Base for details on Surface Preparation.
Health & Safety
- Contaminated Rags, Spray Booth Filters or other substrates should be segregated from other chemical waste, soaked with Water and disposed of in a non-combustible container with a tight fitting Lid.
Issued
27/09/2006 11:57:00