Industrial Cellulose
TOPIND
A fully comprehensive range of clear and pigmented lacquer finishes for high quality industrial finishing of all types, particularly over both hard and softwood substrates. HMG industrial cellulose gives high build, high gloss and great simplicity of use. These properties combined offer the user a quick and economical way to achieve a high standard of work.
Data Sheets
Technical Properties
Coverage
10 square metres per litre @ 50 microns
Flashpoint
-4 °C
Temperature Resistance
70 °C
Storage
Store between 5°C - 25°C. When not in use, cans must be kept sealed
Shelf Life
12 months from delivery date in original sealed containers
Maximum VOC Content
0.66 Kg/l
Regulations
Not to be used in connection with 2004/42/CE
Not to be Used under SI2005:27773
Colour Range
Available in a wide colour range including RAL & BS shades
Cleaning
Over Wood: Fill grain as appropriate using good quality wood filler. Flat thoroughly using 180 - 240 Garnet Paper. Tak rag surface. Apply HMG Spirit Stain if appropriate. HMG Sanding Sealer or HMG Pre-Cat Sanding Basecoat are used on woods subject to grain raising prior to application of Industrial cellulose lacquers. Pre-treatment: Under 'pigmented' Industrial Cellulose colours on wood and on steel substrates a variety of HMG Build Up systems can be used including: HMG E9 White/Grey Primer, and HMG 2 Pack or Stoving Primer Systems. NB: If Industrial cellulose is to be used over aluminium and alloys an HMG etch primer or Washfiller must be used. For full advice on priming difficult substrates, please contact: HMG Technical Support.
Health & Safety
- Refer to SDS and tin label prior to use.
Issued
22/09/2005 16:35:00
