Hammer Finishes QAD
TOPNONHAM
HMG Hammer finishes are used to produce an attractive and durable special effect finish, which will hide imperfections on marked, pitted, or uneven surfaces of all types. Non-Cell (Air dry acrylic) are the most popular general purpose Hammer finish for application on a wide variety of substrates, offering excellent drying gloss, adhesion and weathering properties.
Data Sheets
Technical Properties
Coverage
20 square metres per litre @ 40 microns dft
Flashpoint
4 °C
Temperature Resistance
80 °C
Storage
Store between 5°C - 25°C. When not in use, cans must be kept sealed
Shelf Life
12 months from delivery date in original sealed containers
Maximum VOC Content
0.54 Kg/l
Regulations
Not Applicable
Colour Range
A Standard range of colours are available.
Cleaning
Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.
Surface Preparation
Please refer to Knowledge Base for details on Surface Preparation.
Health & Safety
- Refer to SDS and tin label prior to use.
- Contaminated Rags, Spray Booth Filters or other substrates should be segregated from other chemical waste, soaked with Water and disposed of in a non-combustible container with a tight fitting Lid.
Issued
22/09/2005 16:35:00
