Tube Enamel Clear
TOP10518
A high solids amino cured polyester coating designed to give good adhesion and flexibility on collapsible tubes. Initial Cure 6-10 mins @ 120°c then 6-10 mins @ 160°c. Typical dry film thickness 8-12 microns internal. Passes 50 double Acetone rubs when cured as above.
Data Sheets
Technical Properties
Flashpoint
> 35 °C
Storage
Store between 5°C - 25°C. When not in use, cans must be kept sealed
Shelf Life
12 months from delivery date in original sealed containers
Additional Technical Information
Suitability and compatability with the product to be filled must be established if used as an internal lacquer.
Maximum VOC Content
0.600 Kg/l
Colour Range
Available as a Clear
Packaging
20lts
Cleaning
Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.
Surface Preparation
Please refer to Knowledge Base on our website for details on Surface Preparation.
Health & Safety
- Refer to SDS and tin label prior to use.
- Suitable respiratory equipment should be worn when spraying.
Issued
08/08/2017 00:00:00