1K DTM 30 Colour

TOP1KDTM30


A high quality, single coat finish achieving a 30% gloss level. 1K DTM is a compliant product offering good corrosion resistance, early moisture resistance.

hmg tin photo

Data Sheets

Technical Properties

Coverage

6 square metres per litre @ 100 microns dft

Flashpoint

24 °C

Storage

Store between 5°C - 25°C. When not in use, cans must be kept sealed

Shelf Life

12 months from delivery date in original sealed containers

Additional Technical Information

PLEASE NOTE:- Film thicknesses applied beyond those recommended on the TDS can dramatically slow down touch and through drying characterisitcs.

Maximum VOC Content

0.420 Kg/l

Regulations

PG6/23 11

Colour Range

Available in a wide colour range including RAL & BS shades

Cleaning

Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.

Surface Preparation

Please refer to Knowledge Base for details on Surface Preparation.

Health & Safety

  • Refer to SDS and tin label prior to use.
  • Suitable respiratory equipment should be worn when spraying.
  • Contaminated Rags, Spray Booth Filters or other substrates should be segregated from other chemical waste, soaked with Water and disposed of in a non-combustible container with a tight fitting Lid.

Issued

11/10/2021 09:48:00

Getting in touch.

To place an order or to find out more about HMG Paints get in touch via the details below.