SAH300 Enamel Resin

TOPSAHBASCLE


SAH 300 Enamel Resin is used as part of the HMG Synthetic Mixing Scheme in combination with HMG Synthetic Double Base Tints and 7090 Lead Free Driers. Full mixing details are given on HMG ColourBase. Full Techical Information is available on the SAH 300 Enamel Technical Data Sheet.

hmg tin photo

Data Sheets

Technical Properties

Coverage

15 square metres per litre @ 25 microns dft

Flashpoint

37 °C

Storage

Store between 5°C - 25°C. When not in use, cans must be kept sealed

Shelf Life

12 months from delivery date in original sealed containers

Maximum VOC Content

0 Kg/l

Regulations

Not Applicable

Colour Range

Cleaning

Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.

Surface Preparation

Please refer to Knowledge Base for details on Surface Preparation.

Health & Safety

  • Contaminated Rags, Spray Booth Filters or other substrates should be segregated from other chemical waste, soaked with Water and disposed of in a non-combustible container with a tight fitting Lid.

Issued

27/09/2006 11:57:00

Getting in touch.

To place an order or to find out more about HMG Paints get in touch via the details below.