Mordant T Wash

PRIMORDANT


Manufactured to a formulation originally developed by the British Rail Board and designed for use as an etching solution for galvanised steel & zintec. Substrate should be cleaned with clean water once Mordant Wash has reacted (turned black) usually after full dry time (see Application 2). Any areas which have not turned black (usually due to substrate contamination) will need to be re-abraided and Mordant Wash re-applied.

Technical Properties

Coverage

20 square metres per litre

Flashpoint

13 °C

Storage

Store between 5°C - 25°C. When not in use, cans must be kept sealed

Shelf Life

12 months from delivery date in original sealed containers

Maximum VOC Content

0.35 Kg/l

Regulations

Out of Scope

Colour Range

Cleaning

Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.

Surface Preparation

Please refer to Knowledge Base for details on Surface Preparation.

Health & Safety

  • Refer to SDS and tin label prior to use.

Issued

22/09/2005 16:35:00

Getting in touch.

To place an order or to find out more about HMG Paints get in touch via the details below.