HB05 Primer
PRI05
An Alkyd based, high build primer offering outstanding adhesion, moisture resistance and corrosion protection due to incorporation of modified Zinc Phosphate. Designed for airless or conventional application for structural steelwork, chassis, steel fabrication etc. It is easy to apply without fear of runs or sags at high wet film thickness.
Data Sheets
Technical Properties
Coverage
5.5 square metres per litre @ 100 microns wft
Flashpoint
24 °C
Temperature Resistance
60 °C
Storage
Store between 5°C - 25°C. When not in use, cans must be kept sealed
Shelf Life
12 months from delivery date in original sealed containers
Maximum VOC Content
0.400 Kg/l
Regulations
Not Applicable
Colour Range
Black, Buff, Grey, Red Oxide and White. Other colours available on request.
Cleaning
Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of Preparatory Cleaners suitable for most cleaning and degreasing processes. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.
Surface Preparation
Please refer to Knowledge Base for details on Surface Preparation.
Health & Safety
- Refer to SDS and tin label prior to use.
- Contaminated Rags, Spray Booth Filters or other substrates should be segregated from other chemical waste, soaked with Water and disposed of in a non-combustible container with a tight fitting Lid.
Issued
22/09/2005 16:35:00
