High Build Vinyl Primer Finish

PRIHBVPCOL


1K High Build Anti Corrosive Vinyl Primer Finish designed to give excellent adhesion and corrosion protection to mild steel, aluminium, stainless steel and galvanised substrates.

hmg tin photo

Data Sheets

Technical Properties

Coverage

8 square metres per litre @ 50 microns dft

Flashpoint

25 °C

Storage

Store between 5°C - 25°C. When not in use, cans must be kept sealed

Shelf Life

12 months from delivery date in original sealed containers

Maximum VOC Content

0.390 Kg/l

Colour Range

Available in a wide colour range including RAL & BS shades

Packaging

5lt & 20lt tins

Cleaning

Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.

Surface Preparation

Please refer to Knowledge Base on our website for details on Surface Preparation. *Please note: There are several different types cladding, an application / adhesion trial on a small test area is essential to verify the suitability of painting each project. For more information please contact the HMG Technical Team. It is not recommended to paint New Plastisol until it is weathered, in which case it may still require a primer before overcoating. Please speak to the HMG technical team for more information.

Health & Safety

  • Refer to SDS and tin label prior to use.
  • Suitable respiratory equipment should be worn when spraying.

Issued

07/11/2012 00:00:00

Getting in touch.

To place an order or to find out more about HMG Paints get in touch via the details below.