SAH300 Enamel

TOPSAH300


A high solids, gloss 1K Polyurethane alkyd designed for brush application. It affords excellent protection against harsh weather conditions, atmospheric pollution, road dirt, sharp cleaning agents and mechanical car washes etc. SAH300 is only available in a full gloss finish.

Technical Properties

Coverage

14 square metres per litre @ 50 microns dft

Flashpoint

> 30 °C

Storage

Store between 5°C - 25°C. When not in use, cans must be kept sealed

Shelf Life

12 months from delivery date in original sealed containers

Maximum VOC Content

0.340 Kg/l

Regulations

2004/42 IIB (D) 420

Colour Range

Available in a wide colour range including Fleet, RAL & BS and Automotive shades

Cleaning

Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.

Surface Preparation

Please refer to Knowledge Base for details on Surface Preparation.

Health & Safety

  • Refer to SDS and tin label prior to use.
  • Contaminated Rags, Spray Booth Filters or other substrates should be segregated from other chemical waste, soaked with Water and disposed of in a non-combustible container with a tight fitting Lid.

Additional Information

For Professional Use Only.
This product was designed for brush application onto large areas. It has been developed to provide a long 'wet edge' and an extended drying time. It may not be suitable for small areas or areas that are due to be returned to service in short time-frames. HMG Coach Enamel can be used as a quicker drying alternative.

Issued

22/09/2005 16:35:00

Getting in touch.

To place an order or to find out more about HMG Paints get in touch via the details below.