Coach Enamel
TOPCE
A traditional, ultra high quality, high build, long oil synthetic enamel for brush application. It gives an extra long wet edge time allowing it to be brushed without brush drag. It gives ultimate high gloss, build and scratch filling combined with excellent water resistance, flexibility and good exterior durability and toughness.
Data Sheets
Technical Properties
Coverage
11 square metres per litre @ 50 microns dft
Flashpoint
-42 °C
Temperature Resistance
90 °C
Storage
Store between 5°C - 25°C. When not in use, cans must be kept sealed
Shelf Life
12 months from delivery date in original sealed containers
Maximum VOC Content
0.380 Kg/l
Regulations
2004/42 IIA SB (D) 300
Colour Range
Available in a wide colour range including RAL & BS shades
Cleaning
Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.
Surface Preparation
Please refer to Knowledge Base for details on Surface Preparation.
Health & Safety
- Refer to SDS and tin label prior to use.
- Suitable respiratory equipment should be worn when spraying.
- Contaminated Rags, Spray Booth Filters or other substrates should be segregated from other chemical waste, soaked with Water and disposed of in a non-combustible container with a tight fitting Lid.
Issued
22/09/2005 16:35:00
