C71 Speedline
TOPC71
A high quality '2 hour' drying time Synthetic Alkyd Enamel. It offers fast surface drying, good through drying even in thick films and outstanding film hardness and toughness. In addition, yellowing is minimal even after prolonged exposure to higher temperatures
Data Sheets
Technical Properties
Coverage
8 square metres per litre @ 50 microns dft
Flashpoint
29 °C
Temperature Resistance
170 °C
Storage
Store between 5°C - 25°C. When not in use, cans must be kept sealed
Shelf Life
12 months from delivery date in original sealed containers
Maximum VOC Content
0.45 Kg/l
Regulations
Out of Scope
Colour Range
Available in a wide colour range including RAL & BS shades
Cleaning
Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.
Surface Preparation
Please refer to Knowledge Base for details on Surface Preparation.
Health & Safety
- Refer to SDS and tin label prior to use.
- Suitable respiratory equipment should be worn when spraying.
- Contaminated Rags, Spray Booth Filters or other substrates should be segregated from other chemical waste, soaked with Water and disposed of in a non-combustible container with a tight fitting Lid.
Issued
22/09/2005 16:35:00
