Hammer Finishes QAD

TOPNONHAM


HMG Hammer finishes are used to produce an attractive and durable special effect finish, which will hide imperfections on marked, pitted, or uneven surfaces of all types. Non-Cell (Air dry acrylic) are the most popular general purpose Hammer finish for application on a wide variety of substrates, offering excellent drying gloss, adhesion and weathering properties. HMG manufacture a range of both air dried, stoving enamel, and 2 Pack Hammer finishes to cover all types of application and performance requirements.

hmg tin photo

Data Sheets

Technical Properties

Coverage

20 square metres per litre @ 40 microns dft

Flashpoint

4 °C

Temperature Resistance

80 °C

Storage

Store between 5°C - 25°C. When not in use, cans must be kept sealed

Shelf Life

12 months from delivery date in original sealed containers

Maximum VOC Content

0.54 Kg/l

Regulations

Not Applicable

Colour Range

A Standard range of colours are available, other colours by request.

Cleaning

Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.

Surface Preparation

Please refer to Knowledge Base for details on Surface Preparation.

Health & Safety

  • Refer to SDS and tin label prior to use.
  • Contaminated Rags, Spray Booth Filters or other substrates should be segregated from other chemical waste, soaked with Water and disposed of in a non-combustible container with a tight fitting Lid.

Issued

22/09/2005 16:35:00

Getting in touch.

To place an order or to find out more about HMG Paints get in touch via the details below.