AR141 Matt Black
TOPAR141BLK
An air dying silicone based paint specifically formulated to enable the dried film to tolerate high temperatures up to 300 ºC. The full physical properties are achieved after baking at temperatures above 220 ºC (at this temperature the free silicones in the system auto cross link) At temperatures of up to 300 ºC there is virtually no decomposition of the silicone binder. Above 300 ºC the silicone is gradually driven off. NB. An outstanding feature of AR141 is that gassing and smoking are significantly reduced when it first attains high temperature. This is of particular advantage in the automotive field, and when AR141 is use in confined spaces.
Data Sheets
Technical Properties
Coverage
15 square metres per litre @ 15 microns dft
Flashpoint
24 °C
Temperature Resistance
300 °C
Storage
Store between 5°C - 25°C. When not in use, cans must be kept sealed
Shelf Life
12 months from delivery date in original sealed containers
Maximum VOC Content
0.70 Kg/l
Regulations
Not Applicable
Colour Range
Matt Black only.
Cleaning
Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.
Surface Preparation
Please refer to Knowledge Base for details on Surface Preparation.
Health & Safety
- Refer to SDS and tin label prior to use.
- Contaminated Rags, Spray Booth Filters or other substrates should be segregated from other chemical waste, soaked with Water and disposed of in a non-combustible container with a tight fitting Lid.
Issued
12/03/2014 16:35:00
