Paint System Multi Pack Non Aircraft Use Low VOC Finish Near Matt
See Colour Range for Product Codes
A high solids, solvent based two pack Polyurethane finish designed for use on military vehicles and ground equipment. When used over an appropriate primer, the finishing scheme satisfies the infra-red camouflage requirements of DEF STAN 00-23 and the Chemical Agent Resistance Coating (CARC) requirements of DEF STAN 00-72.
Data Sheets
Technical Properties
Coverage
12.5 square metres per litre @ 40 microns dft
Flashpoint
27 °C
Storage
Store between 5°C - 25°C. When not in use, cans must be kept sealed
Shelf Life
12 months from delivery date in original sealed containers
Maximum VOC Content
0.42 Kg/l
Colour Range
Nato Green BS381C 285 <b>(DEF2302007)</b> <i>NSN8010996711759</i>
Light Stone BS381C 361 <b>(DEF2302008)</b> <i>NSN8010998456857</i>
White <b>(DEF2302009)</b>
Black <b>(DEF2302010)</b> <i>NSN8010992173947</i>
Desert Sand BS381C 380 <b>(DEF2302029)</b>
Packaging
5L Composite Pack
Cleaning
Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.
Health & Safety
- Refer to SDS and tin label prior to use.
- RFU product contains isocyanates. Suitable air fed respiratory equipment should be worn when spraying.
- Refer to JD11/77 health and safety data sheet.
Additional Information
Induction time:- 15 mins
Mixing time:- After 15 minutes - mechanical shaking on gyro - 3 mins
By hand until thoroughly mixed.
It is important to consider environmental aspects for quality concerns with regards to both application and storage. For example, please see graph below:
Issued
28/05/2021 00:00:00