A rapidly curing U.V. clear lacquer that provides an extremely hard, tough and scratch-resistant film. Suitable for white ABS, black ABS and blended ABS Alloy substrates.
-9 °C
Store between 5°C - 25°C. When not in use, cans must be kept sealed
12 months from delivery date in original sealed containers
0.690 Kg/l
Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.
Please refer to Knowledge Base on our website for details on Surface Preparation.
(Ready to use for most purposes but can be
thinned with an appropriate solvent if
Required.)
NVC solids - 31% +/- 1
RESITIVITY:-
Below 50K Ohms
PROCESSING:-
Allow 2-3 minutes warm air drying to
evaporate solvents from the film before U.V.
curing.
STORAGE AND HANDLING:-
Keep in adequate store for highly
inflammable goods. Do not expose to
direct sunlight. This product contains
irritant acrylate esters and it is essential
that skin contact with uncured materials be
avoided. Refer to Health/Safety data sheet.
22/02/2019 00:00:00
To place an order or to find out more about HMG Paints get in touch via the details below.