Technical Properties

Coverage

20 square metres per litre @ 20 microns dft

Flashpoint

4 °C

Temperature Resistance

Up to 80 °C

Storage

Store between 5°C - 25°C. When not in use, cans must be kept sealed

Shelf Life

12 months from delivery date in original sealed containers

Maximum VOC Content

0.70 Kg/l

Regulations

For use in Aerosol, Classis Car Refinish and Industrial Applications

Not to be used in connection with 2004/42/CE

Not to be Used under SI2005:27773

Colour Range

Black.

Cleaning

Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of Preparatory Cleaners suitable for most cleaning and degreasing processes. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.Over Wood: Fill grain as appropriate using good quality wood filler. Flat thoroughly using 180 - 240 Garnet Paper. Tak rag surface. Apply HMG Spirit Stain if appropriate. HMG Sanding Sealer or HMG Pre-Cat Sanding Basecoat are used on woods subject to grain raising prior to application of Industrial cellulose lacquers. Pre-treatment: Under 'pigmented' Industrial Cellulose colours on wood and on steel substrates a variety of HMG Build Up systems can be used including: HMG E9 White/Grey Primer, and HMG 2 Pack or Stoving Primer Systems. NB: If M99 cellulose is to be used over aluminium and alloys an HMG etch primer or Washfiller must be used. For full advice on priming difficult substrates, please contact: HMG Technical Support.

Surface Preparation

Please refer to Knowledge Base for details on Surface Preparation.

Health & Safety

• Refer to SDS and tin label prior to use.

Issued

24/04/2018 16:35:00