Supersheen
TOPSUPSHE
A 2K Polyurethane coating offering ultimate levels of: Weathering, colour retention, solvent resistance, abrasion resistance, wide ranging chemical resistance. N.B. Supersheen is a reduced gloss version of Superthane. For a Full Gloss see Superthane Technical Data Sheet. Supersheen offers the highest quality finish on ferrous and non-ferrous metals, wood, concrete, asbestos, fibreglass etc, and finds use in applications such as Ship Superstructures, Bridges, Aircraft, High Quality Structural Steelwork, Food Storage Warehouses, Abattoirs, Hospital, all structures in chemical or abrasive environments, Railway Rolling Stock, Road Tankers, High Quality Commercial Vehicles, Building Facings. Protection of bright metal surfaces can also be carried out using Clear Supersheen. Supersheen is finding increased popularity in refinishing in all the previously mentioned fields. In most cases all that is necessary on previously painted surfaces, is to flat down and apply either Uniblok Sealer or HMG Washfiller and then apply the Supersheen system in the normal recommended manner. Supersheen is a fairly slow drying system, being dust free in 2 - 4 hours; firm dry in 24 hours; fully cured in 5 days @ 20ºC. It can be subjected to normal exposure to the atmosphere after reaching the firm dry stage, i.e. 24 hours after the application of the final coat, but must be allowed at least 5 days to cure when subjected to chemical or harsh abrasive conditions.
Data Sheets
Technical Properties
Coverage
12.5 square metres per litre @ 40 microns dft
Flashpoint
-4 °C
Temperature Resistance
200ºC for short periods / 150ºC for continuous °C
Storage
Store between 5°C - 25°C. When not in use, cans must be kept sealed
Shelf Life
12 months from delivery date in original sealed containers
Maximum VOC Content
0.5 Kg/l
Regulations
Not Applicable
Colour Range
Available in a wide colour range including RAL & BS shades
Special colours can be matched by request
Cleaning
Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.
Surface Preparation
Please refer to Knowledge Base for details on Surface Preparation.
Health & Safety
- Refer to SDS and tin label prior to use.
- Refer to JD11/77 health and safety data sheet.
- Product contains isocyanates. Suitable air fed respiratory equipment should be worn when spraying.
Issued
22/09/2005 16:35:00
