Wood Stain


A fast drying alcohol based stain offered in a comprehensive range of wood colours. They are quick drying and can be applied by ragging or sprayed direct to bare wood giving a grain highlighting effect. Alternatively they may be blended in any HMG Cellulose / Precat or Acid Catalysed lacquer system to give a "stained lacquer effect system". (Except for wood grain obliteration). Wood Stain can be used on interior woodwork of all types (hard and softwood) and gives excellent interior durability and colour choice.

hmg tin photo

Data Sheets

Technical Properties


10-20 square metres per litre @ 3 microns dft


-19 °C

Temperature Resistance

120 °C


Store between 5°C - 25°C. When not in use, cans must be kept sealed

Shelf Life

12 months from delivery date in original sealed containers

Maximum VOC Content

0.78 Kg/l


Not Applicable

Colour Range

Available in a wide range of Stain Colours. Special colours by arrangement.


Wood surfaces should be flatted well using a fine grade garnet or sandpaper to remove all traces of dirt, grease or staining. Wood Stain must be applied direct to bare wood if the stain is to "strike" the wood effectively. Adhesives and previously applied lacquers or paint systems must be effectively removed.

Surface Preparation

Please refer to Knowledge Base for details on Surface Preparation.

Health & Safety

  • Refer to SDS and tin label prior to use.


22/09/2005 16:35:00

Getting in touch.

To place an order or to find out more about HMG Paints get in touch via the details below.