Mordant T Wash
PRIMORDANT
Manufactured to a formulation originally developed by the British Rail Board and designed for use as an etching solution for galvanised steel & zintec. Substrate should be cleaned with clean water once Mordant Wash has reacted (turned black) usually after full dry time (see Application 2). Any areas which have not turned black (usually due to substrate contamination) will need to be re-abraided and Mordant Wash re-applied.
Technical Properties
Coverage
20 square metres per litre
Flashpoint
13 °C
Storage
Store between 5°C - 25°C. When not in use, cans must be kept sealed
Shelf Life
12 months from delivery date in original sealed containers
Maximum VOC Content
0.35 Kg/l
Regulations
Out of Scope
Colour Range
Cleaning
Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.
Surface Preparation
Please refer to Knowledge Base for details on Surface Preparation.
Health & Safety
- Refer to SDS and tin label prior to use.
Issued
22/09/2005 16:35:00