DEF0101011 Paint Filler Epoxy Spraying Multi-Pack DEF STAN 80-216 White (High Fill)
DEF0101011
A two component, high solids, pigmented, air drying epoxy filler designed to fill uneven profiles of underlying substrate to improve the appearance of subsequent coatings. A higher solids formulation designed for filling more substantial profiles than DEF0101010, and can be utilised where VOC environmental compliance is required. This product conforms to the test requirements of DEF STAN 80-216. Can be overcoated with a variety of systems including DEF STAN 80-161 and DEF STAN 80-225 coatings.
Data Sheets
Technical Properties
Flashpoint
16 °C
Temperature Resistance
180+ °C
Storage
Store between 5°C - 25°C. When not in use, cans must be kept sealed
Shelf Life
18 months from delivery date in original sealed containers
Additional Technical Information
Mixed weight solids:- 70% ± 2%
Mixed volume solids:- 58% ± 2%
Induction time:- 0 mins
Mixing time:- Mechanical shaking on gyro - 3 mins
By hand until thoroughly mixed.
Humidity and Storage Information - see graph below:
This product meets all testing requirements as dictated in DEF STAN 80-216/2.
Note: DEF STAN 80-216 supersedes previous standard DTD 5555A
Maximum VOC Content
0.372 Kg/l
Regulations
2004/42 IIB (C) 540
Colour Range
White
Packaging
2.25 Litre composite pack (2L Base, 250mL Hardener)
Cleaning
Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for the Knowledge Base article on Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.
Surface Preparation
Please refer to HMG Knowledge Base on our website for details on surface preparation.
Health & Safety
- Refer to Health & Safety Data Sheet prior to use.
Additional Information
DEF0101011 is a product that is resistant to attack by chemicals, and is also sandable without clogging.
The epoxy resins used within these paint systems have been proven to withstand extreme low temperatures up to -80°C when cured, and extreme high temperature of up to 250°C
With respect to high temperature resistance some yellowing may occur
above 200°C however the integrity of the resin system will not be compromised at this temperature.
Storage and Operational High Temperature: +71°C
Storage and Operational Low Temperature: -47°C
Passes freeze test at -20°C for 48 hours and subsequent cross-hatch adhesion test to ASTM D3359.
Issued
09/05/2022 00:00:00