High Temp Aluminium 4036 Aerosol
TOPALM4036
An air drying silicone based paint specifically formulated to enable the dried film to tolerate high temperatures of up to 500ºC. The full physical properties of the system are achieved after baking at temperatures above 220ºC (at this temperature the free silicone resins in the system auto cross link). At temperatures of up to 300ºC there is virtually no decomposition of the silicone binder. Above 300ºC the silicone is gradually driven off without charring or flaking of the paint. From 300 - 500ºC. The finish is still efficient because, the pigment film sinters on to the metal surface.
Data Sheets
Technical Properties
Coverage
16 square metres per litre @ 15 microns dft
Flashpoint
-42 °C
Temperature Resistance
500 °C
Storage
Store between 5°C - 25°C. When not in use, cans must be kept sealed
Shelf Life
12 months from delivery date in original sealed containers
Maximum VOC Content
0.700 Kg/l
Regulations
Not Applicable
Colour Range
Silver
Cleaning
Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.
Surface Preparation
Do not use Primer
Health & Safety
- Refer to SDS and tin label prior to use.
- Suitable respiratory equipment should be worn when spraying.
Issued
24/09/2015 16:35:00
