FERROZINC is a high performance water thinnable rust converter. It is an easily applied single pack material with excellent long term conversion properties. In many situations blast cleaning is not cost effective or practical, and though Ferrozinc is not an equivalent alternative to shot blasting, it does offer a far superior performance than conventional coatings applied to slightly rusted surfaces. FERROZINC is used after simple wire brushing to remove surface rust. A dramatic colour change from white to black will show that the rust has been effectively neutralised. FERROZINC should then be overcoated with a suitable primer & topcoat system for prolonged corrosion resistance. Salt spray and extended durability testing has proven FERROZINC to out-perform competitive rust conversion materials. For use on ferrous metals only. Not designed for use on non-ferrous metals (aluminium, copper, & stainless steel etc).

A Water Based 1K Primer that offers excellent adhesion, build and levelling properties. It is simple to use and gives fast through hardening and good protection against corrosion.

A 2K Isocyanate cured 'wet on wet' Acrylic Polyurethane Primer / Surfacer. It can be overcoated with all HMG 2K Topcoats without flatting, but also may be dried and nibbed if required.

A high quality, fast drying and easy to sand 2K Isocyanate cured Acrylic Polyurethane Primer / Filler. Polykote HS Rapidbuild 2K Primer can be used as a surfacer when applied as a thin coat on previously primed or painted substrates.

A transparent 2K adhesion promoter /primer / sealer. It is designed for use on sound OEM finishes when minimum sanding is required and has the additional benefit of being used as a 'wet on wet' primer to optimise process times. It is particularly suitable for colour changes to new vehicles as no sanding is required, however it is recommended that leading edges such as wheelarches, front of bonnets etc... are scotchbrited for maximum performance. The product can be tinted with up to 1% UNIT Tinter colour to assist with opacity. Not for use as a bare metal primer

A 2K Isocyanate cured 'wet on wet' Acrylic Polyurethane Primer / Surfacer. It offers excellent adhesion and anti corrosive properties utilising novel anti-corrosive pigments. It can be overcoated with all HMG 2K Topcoats without flatting, but also may be dried and nibbed if required.

A Non Isocyanate, 2K Primer system. It offers excellent durability, corrosion resistance and performance without the specific health hazards associated with the use of Isocyanate Hardeners

A Zinc Phosphate 2K Epoxy Primer offering excellent adhesion, water and chemical resistance combined with good corrosion protection.

A Zinc Phosphate 2K Epoxy Primer, containing MIO, designed to offer the ultimate in heavy duty anti-corrosion protection. It gives excellent adhesion, chemical resistance and is particularly useful in areas exposed to severe weathering or chemical attack from salts, dilute acids and alkalis etc.

A Zinc Phosphate 2K Epoxy Primer designed to offer the ultimate in heavy duty anti-corrosion. It gives excellent adhesion, chemical resistance and is particularly useful in areas exposed to severe weathering or chemical attack from salts, dilute acids and alkalis etc.

An Ultra Zinc Rich, high build 2K Epoxy Primer. It offers very good anti-corrosive properties and can be overcoated quickly without aeration problems. Product dries to a Matt Grey finish, which can be rubbed with wire wool to give a galvanised metallic effect, if required.

A 2K heavy bodied Sprayable filler. It is used for the deep filling of substrates of various types. It is used extensively in the automotive re-finishing field, where its ultra high build and quick curing make it ideal for use in repair situations. Other uses include as a high build grain filler for rough timber, and as an effective sealer for fibreboard, MDF chipboard etc...