A fully comprehensive range of clear and pigmented lacquer finishes for high quality industrial finishing of all types, particularly over both hard and softwood substrates. HMG industrial cellulose gives high build, high gloss and great simplicity of use. These properties combined offer the user a quick and economical way to achieve a high standard of work.

A high quality Cellulose product for use on Classic Cars, Industrial applications. It gives excellent gloss 'from the gun' and provides fast through drying, ease of use, and gives a hard and durable dried film enabling rapid throughput of work.

An air dried special effect finish, originally developed for ultra high quality interior decorative domestic and industrial applications. The tough, flexible and adherent SQ 26 Basecoat can be applied over all suitably primed substrates. This is followed (after the basecoat has dried) by a full coat of the unique HMG SQ 26 crackle coat. During drying, a shrinkage effect on the specially formulated crackle coat leads to a unique decorative "Crackle finish" which is available in range of colours. Finally a clear over-lacquer is used to seal and preserve the unique "crackle" decorative effect.

HMG Clear Shrinking Dope is a traditional nitrocellulose (nitrate) dope for application to fabric, paper and other coverings used in the modelling field. It tightens model fabrics to provide a seal against weather and water. HMG Clear Dope is also useful in a range of other craft applications where its unique taughtening properties are used. ( ie. Dried flower work and gut tension reviver.)

A high quality Fluorescent Cellulose product for Automotive and Industrial use. To be used as part of a 3 coat system.

A high quality quick drying product for use on Ammunition. It provides fast through drying, ease of use, and gives a hard and durable dried film.

M20 Basecoat gives high opacity and excellent application characteristics for a full range of colours. It offers superb properties including simplicity of use, excellent durability, rapid drying and quick taping times. This product is suitable for application over all suitably prepared and primed metal surfaces and can be used on wood and certain plastics.

A versatile, high build, easy to apply, single pack Chlorinated Rubber based paint. It gives excellent durability combined with good resistance to acids, alkalis and oxidising agents in aqueous and gaseous forms.

A versatile, high build, easy to apply, single pack Chlorinated Rubber based paint. It gives excellent durability combined with good resistance to acids, alkalis and oxidising agents in aqueous and gaseous forms. Due to excellent chemical resistance of Chlorinated Rubber, the product is ideal for pool coating purposes, where a solvent-based product is required – normally for pools that have been previously coated with Chlorinated Rubber based products and in low water table situations. In high water table situations, (high osmotic pressure on pool walls) we recommend the use of water-based pool coatings, and in the case of Marblite substrates we recommend the use of two-pack Epoxy-based pool coatings. Please refer to our Coating of Swimming Pools document for further information.”

A temporary coating formulated with special waterborne polymers which have the property of being soluble in some solvents and weak aqueous alkali solutions, but become insoluble in water once the paint has dried.

A Highly Flexible Polyurethane semi-gloss coating with excellent adhesion properties on difficult substrates such as PVC, PU elastomer, rubber variants, fabrics, leather. Flexithane can be cross-linked with isocyanate hardener 9002, (using 10% by volume of hardener before thinning). The hardener is supplied separately and added immediately prior to using the paint. The pot life once the hardener is added is 8 hours. Flexithane is supplied as a semi-gloss finish only.

A fast drying paint for application to all types of road surfaces including bitumen (tarmac) types, based on a unique resin binder system. The substrate temperature should be 5 ºC or above for application and during cure, and a minimum of 3 ºC above the dew point. Ensure adequate ventilation. Available in White (A274) and Yellow (A268)